LAN controller is a simple, but innovative device which has long been lacking in the market network solutions. A small board serves as a web server which presents the various sensor readings and allows you to remotely control up to 6 outputs. Additionally Events Config feature allow you to setup the appropriate action when sensor readings met certain conditions, for example relay can turn up heater when temperature goes down bellow fixed temperature. ISP can use watchdog function, it check the ping up to 5 network devices, and if no response runs the relays. Useful for many applications can be a Scheduler, that allows turn on / off the devices at a specified time or for a specified period of time. There is also PWM output to control brightness of light or an electric motor speed. For far from socket installation board could be powered by passive PoE supply. Few versions of firmware is available today, each is still developed and after publication customer could upgrade it by preapred software. In Accessory are presented all sensors and upgrade kits compatible with Lan Controller.
Examples of applications
ISP
- watchdog function to checking TCP/IP connection and launch outputs if hanging happen
- temperature, supply voltage and person occupancy control in server rooms
- weather condition report on the occasion of IP cameras views
Home control
- home electric stove control (automatically or remote)
- turning on/off home lightening remote, by scheduler or by event, controlling intensity
- turning off TV box if remote is other person hands ;-)
- irrigation control - you don't need visit your garage to modify irrigation time or you can turn sprayer precisely in the moment when your favorite neighbor passes near ;-)
Home installations
- temperature controlling and simple automation in your heating system
- temperature and pressure controlling in solar thermal installations
- measurements of heat pump operation
- monitoring of grid voltage and automatic switching to backup with mail notification
- remote control (by LAN or wirelesslan) understands as forwarding command to one of output of Lan controller from input of other Lan controller.
Renewable energy
- measurements of solar cells work
- measurements of wind turbines
- measurements of charging battery
- measurements of power consuming
Agriculture
- Irigation systems
- Animal food processing automatization
- 5 analog inputs: temperature, voltage, current (by additional boards) and another physics measurements
- 1 digital input for 1wire bus with support for 4 or 6 temperature sensors.
- 1 relay output (NO, NC, C)
- 1 transistor output up to 1A
- 4 outputs to switch relays or transistors
- 4 PWM outputs 2,6KHz - 4MHz
- supply voltage and temperature monitoring on board
- reverse polarization protection
- 1 PWM 2,6KHZ do 4MHz
Technical specification:
- supply voltage: 8-28V
- power consumption : about 1W
- PoE supply: YES, passive
- interface: ethernet 10Mbit/s
- relay: 255VAC 10A
- operation temperature: -20 do +85deg C
- dimensions: 60x68mm
- weight 50g (without casing)
Instruction Manual LAN Controller V2.0 Firmware: HOME: from 3.13 HOME: wersja od 3.13 ISP: from 2.09
SHORT MANUAL HW2.0
POST/GET data description
Product Comparison
Firmware versions description
Our Lan Controller processor is tiny and our custmers demands huge. Becouse we can't fit all desire features in one firmware we decided to publicized different firmware types for different applications. Firmware upgrade is possible by LAN Controller Tools software or (only on Windows XP) or by simple tftp command from terminal window. This upgrade is described in manual in details. This time there are available 2 types of firmware: 2.xx - except main Control Panel site and standard other has Watchdog tab, usefull tool for all IP network managing. This feature allows monitoring 5 IP addreses and cause output reaction if ping respond is not active. 3.xx- Smart Home version is bereft Watchdog tab, but has more features usefull for home or company appliaction. There were added humidity DHT22 sensor support, reading up to 6sth 1wire temperature sensors, support logical inputs work as bistable switches and support reading from pulse measurement instruments for example energy meter.
FirmwareLAN Controler Tools
Version2.xx V2.00 HW2.0
V2.03 HW2.0
V2.07 HW2.0
V2.09 HW2.0
Version 3.xx
V3.03 HW2.0
V3.06 HW2.0
V3.10 H2.0
V3.13 HW2.0
V3.15 HW2.0
Movie how to Upgrade LAN Controler
Confirmation of compliance CE
Δεν βρέθηκαν δημοσιεύσεις