The hAP mini is a small 2GHz wireless access point for home or small offices. It has three ports, which are configured as one Internet port and two LAN ports, but can be reconfigured as desired, using the powerful RouterOS configuration options.
The powerful 650MHz CPU gives you full access to the wide variety of features provided by the versatile RouterOS operating system, but if all you want is a simple access point - it is already configured out of the box. You simply need to open it’s web configuration page and provide a password for it.
Details | |
---|---|
Product code | RB931-2nD |
CPU nominal frequency | 650 MHz |
CPU core count | 1 |
Size of RAM | 32 MB |
10/100 Ethernet ports | 3 |
Wireless chip model | QCA9533 |
Wireless standards | 802.11b/g/n |
Power Jack | 1 |
Supported input voltage | 5 V - 5 V |
Dimensions | 48 x 78 x 81mm |
Operating System | RouterOS |
License level | 4 |
Antenna gain | 1.5 |
CPU | QCA9533 |
Max Power consumption | 3.5W |
Number of chains | 2 |
Storage type | FLASH |
Storage size | 16 MB |
Ethernet test results
RB931-2nD | QCA9533 100M three port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 24.4 | 296.3 | 70.5 | 288.8 | 395.0 | 202.2 |
Bridging | 25 bridge filter rules | 24.4 | 296.3 | 70.5 | 288.8 | 85.8 | 43.9 |
Routing | none (fast path) | 24.4 | 296.3 | 70.5 | 288.8 | 386.6 | 197.9 |
Routing | 25 simple queues | 24.4 | 296.3 | 64.9 | 265.8 | 151.6 | 77.6 |
Routing | 25 ip filter rules | 24.4 | 296.3 | 62.3 | 255.2 | 61.4 | 31.4 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results